0 Yorum
LGWM 1/5
STK:
LGWM 1/5
6.037,12 TL + KDV
7.244,54 TL Kdv Dahil
Stokta var
Stok Adet : 78
Kategori
Fiyat
107,08 EUR + KDV
17:00’a kadar verilen siparişler aynı gün kargoda
Açıklama
A low consistency mineral oil based grease, using a lithium soap and containing extreme pressure additives. It is extremely suitable for the lubrication of bearings operating under both radial and axial loads.
Faydalar
- Good oil film at very low temperatures
- Good pumpability down to low temperatures
- Good corrosion protection
- Good water resistance
Teknik Özellikler
| Suitable for High load applications | ⚫⚫⚫⚫⚪ |
|---|---|
| Suitable for Vertical shaft applications | ⚫⚪⚪⚪⚪ |
| Suitable for applications with Oscilating movements | ⚫⚫⚫⚫⚪ |
| Suitable for applications with Severe vibrations | ⚫⚫⚪⚪⚪ |
| Suitable for applications that require Rust protection | ⚫⚫⚫⚫⚪ |
| Suitable for applications that require Water resistance | ⚫⚫⚫⚫⚪ |
| Suitable for applications that require Frequent start-up | ⚫⚫⚫⚫⚫ |
| Çalıştırma sıcaklığı aralığı | °C |
| Load Range | High C/P ~ 4 |
| Speed Range | Low - Medium |
| Dropping point (min) ISO 2176 | 170°C |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 310 - 340 |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | +50 |
| Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm | - |
| Mechanical stability, V2F test, 144 hrs | - |
| Corrosion protection, Emcor, ISO 11007, Distilled water | 0-0 |
| Corrosion protection, Emcor, ISO 11007 modified, Water washout | 0-0 |
| Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl | 0-0 |
| Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C | 1 |
| Oil separation DIN 51817, 40°C, % | 8-13 |
| Lubrication ability, R2F test B at 120°C | 100°C'de geçiş |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 2 max. at 90°C |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | 1000 at 100°C |
| EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N | 1.8mm |
| EP performance - 4 ball - Weld load (min.) DIN 51350/4 | 2800N |
| Category | Bearing grease |
| Yağlama maddesi | LGWM 1 |
| NLGI tutarlılık sınıfı | 1 |
| Base oil viscosity DIN 51562 at 40 °C | 200mm²/s |
| Base oil viscosity DIN 51562 at 100 °C | 16mm²/s |
| Biodegradable | Hayır |
| Food Grade | Hayır |
| DIN 51825 kuralları | KP1G-30 |
| Koyulaştırıcı | Lityum |
| Renk | Kahverengi |
| Baz yağ tipi | Madeni |
| Raf ömrü | 5year |
| Tek noktalı yağlama için kullanılabilir | hayır |
| Country of Manufacturing (COM code) | 11 - Sweden |
| Ürün net ağırlığı | 5kg |
| eClass kodu | 23-06-01-01 |
| UNSPSC kodu | 15121902 |
Bu ürüne ilk yorumu siz yapın!
Ürün hakkında henüz soru sorulmamış.
Sitemize ilk yorumu siz yapın!