0 Yorum
LGWA 2/1
STK:
LGWA 2/1
1.347,26 TL + KDV
1.616,72 TL Kdv Dahil
Stokta var
Stok Adet : 78
Kategori
Fiyat
24,06 EUR + KDV
17:00’a kadar verilen siparişler aynı gün kargoda
Açıklama
A premium quality mineral oil based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for industrial and automotive applications when loads or temperatures exceed the range of general purpose greases.
Faydalar
- Excellent lubrication at very peak temperatures for short periods
- Protection of wheel bearings operating under severe conditions
- Effective lubrication in wet conditions
- Good water and corrosion resistance
- Excellent lubrication under high loads and low speeds
Teknik Özellikler
| Suitable for High load applications | ⚫⚫⚫⚪⚪ |
|---|---|
| Suitable for Vertical shaft applications | ⚫⚫⚫⚪⚪ |
| Suitable for applications with Oscilating movements | ⚫⚫⚪⚪⚪ |
| Suitable for applications with Severe vibrations | ⚫⚫⚫⚫⚪ |
| Suitable for applications that require Rust protection | ⚫⚫⚫⚫⚪ |
| Suitable for applications that require Water resistance | ⚫⚫⚫⚫⚪ |
| Suitable for applications that require Frequent start-up | ⚫⚫⚫⚫⚪ |
| Çalıştırma sıcaklığı aralığı | °C |
| Load Range | Low - High C/P > 4 |
| Speed Range | Low - Medium |
| Dropping point (min) ISO 2176 | 250°C |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 265 - 295 |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | +50 (325 max) |
| Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm | +50 |
| Mechanical stability, V2F test, 144 hrs | M |
| Corrosion protection, Emcor, ISO 11007, Distilled water | 0-0 |
| Corrosion protection, Emcor, ISO 11007 modified, Water washout | 0-0 |
| Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl | - |
| Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C | 1 |
| Oil separation DIN 51817, 40°C, % | 1-5 |
| Lubrication ability, R2F test B at 120°C | 100°C'de geçiş |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 2 max. |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | min. 1000 at 130°C |
| EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N | 1.8mm |
| EP performance - 4 ball - Weld load (min.) DIN 51350/4 | 2600N |
| Country of Manufacturing (COM code) | 11 - Sweden |
| Ürün net ağırlığı | 1kg |
| eClass kodu | 23-06-01-01 |
| UNSPSC kodu | 15121902 |
Bu ürüne ilk yorumu siz yapın!
Ürün hakkında henüz soru sorulmamış.
Sitemize ilk yorumu siz yapın!